Gigabit PoE Splitter 12V 1A Output with IEEE 802.3af Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5x2.1mm DC Plug Cable(PS5712G)

Product Information

Yes, this adapter will meet the power requirements for yourVerizon SLS-BU10B cell extender. This splitter is compatible with 802.3af/at 44-57 volt range PoE input. As mentioned above, IEEE 802.3af delivers a maximum of 15.4W per port, while PoE+ supports up to 30W. The challenge arises when planning to connect multiple devices to a single PoE/PoE+ switch. It's essential to ensure that the total power requirements of these devices do not exceed the switch's maximum power wattage. Home Automation Setup / Smart Home Configuration and control from anywhere over WIFI or Voice Commands

However, some devices, like 802.11ac wireless APs with multiple USB ports and radios, need over 30 watts for peak performance. For these cases, PoE++ or PoH switches are the solution. Keep in mind that some devices can adapt to lower power availability by using fewer radios or disabling features. FS Network Switches: Your PoE Solution DSTV XtraView Installation & Frequencies (DSTV User Bands) for Multichoice Explora/HDPVR and other decodersThe PoE Splitters supports Mode A (Pins 1,2 + 3,6-) and B (7,8 + 4,5-) for both IEEE 802.3af /802.3at standard protocol for supplying DC power.

Because they are not dependent on a constant power source, these cameras can be installed in various locations, including areas without electrical outlets. This makes them suitable for both indoor and outdoor use. The unit’s data rate of Gigabit 10/100/1000 (GbE) transfer supports an ultra-fast maximum data rate of 1 Gigabit per second (Gbps – 1000 Mbps) and does not affect the speed performance of the local area network and devices.Po E+ ) can deliver up to 30 watts over network cables with 25.5 watts available to the receiving devices. For this reason, PoE Plus is also known as High PoE.

T ype 3, also known as PoE++, can provide up to 60W per PoE port (ensuring a minimum of 51W on each PD port). It's suitable for powering devices such as video conferencing systems components. IEEE 802.3bt is the latest PoE standard that defines two types of powering/wattage standards - Type 3 and Type 4. They will increase the maximum PoE power by delivering more power through two or more pairs of Ethernet cables. In Type 3 and Type 4 modes, PSEs will identify the PDs and allocate power based on the maximum power requirement of the PDs, resulting in an enhanced power delivery system. The standard will include support for 2.5GBASE-T, 5GBASE-T, and 10GBASE-T while existing standards have a maximum speed of 1-Gbps. It's designed for demanding applications such as laptops and LED lighting.The 48V to 12V 3A POE+ Gigabit Splitter receives data and power over a single Cat7/Cat6A/Cat6/Cat5e Ethernet cable and splits the power and the data into two output cables (i.e, the 5.5mm x 2.1mm x barrel plug to provide 12 Volt 3 Amps of power to the device, and the RJ45 Ethernet cable to provide the data). This will allow a non-PoE, 5 volt device to be remotely installed and powered over the Ethernet cable (PoE). Connect the camera to a PoE switch via an ethernet cable, connect the PoE switch to your router, and power on the PoE switch